0123456789
list icon
list icon

ARP 2600 FS ARP 2600 FS

Delen

ARP 2600 FS

SEMI-MODULAR SYNTHESIZER

Ondersteuning

Lees meer

Gerelateerde websites

Accessoires

ARP 2600 FS

Operating temperature range
0 – +40 °C (non‐condensing)
Maximum Polyphony
2 voices for duo phonic; normally monophonic
VCO-1 (Voltage Controlled Oscilator 1)
Waveforms
Sawtooth, square
Frequency range
Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz - 10 kHz (audio mode)
Voltage controlled response
1V/oct.
VCO-2 (Voltage Controlled Oscilator 2)
Waveforms
Sawtooth, pulse (dynamic pulse), triangle, sine
Frequency range
Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz - 10 kHz (audio mode)
Pulse width
10% – 90%
Voltage controlled response
1V/oct.
VCO-3 (Voltage Controlled Oscilator 3)
Waveforms
Sawtooth, pulse (dynamic pulse)
Frequency range
Approx. 0.03 Hz - 30 Hz (low freq. mode)
Approx. 10 Hz - 10 kHz (audio mode)
Pulse width
10% – 90%
Voltage controlled response
1V/oct.
VCF (Voltage Controlled Filter)
Type
Low-pass (TYPE I : early 24 dB/oct., TYPE II: late 24 dB/oct.)
Frequency range
Approx. 10 Hz - 10 kHz
Resonance
1/2 - self oscillate
VCA (Voltage Controlled Amplifier)
Control voltage
AR type (internally connected)
ADSR type (internally connected)
Noise generator
Noise spectrum types (white and pink)
RING MODULATOR
Type
Analog multiplier
Input signal (Internally connected)
VCO-1 sawtooth wave, VCO-2 sine wave
SAMPLE & HOLD
Sampled signal
Noise (internally connected)
AUDIO OUTPUT JACKS
Front Panel (LEFT, RIGHT OUTPUT jacks
Connector
φ3.5 mm monaural phone jack
Maximum output level
+9 dBu @ 10 kΩ load
Output impedance
1.2 kΩ
Side Panel R
Connector
XLR端子
XLR connector
Maximum output level
+4 dBu @ 600Ω load
Output impedance
1.2kΩ
HEADPHONES JACK
Connector
φ6.3 mm stereo phone jack
Maximum output level
50 mW + 50 mW @ 33Ω load
Output impedance
20Ω
EXTERNAL AUDIO INPUT (PREAMPLIFIER INPUT) JACK
Connector
φ3.5 mm monaural phone jack
Maximum input level
−10 dBu
Input impedance
100kΩ
MIDI connector
IN, OUT, THRU
USB port
Type B

ARP 3620 (keyboard unit)

Keyboard
49-note (with aftertouch, no velocity sensitivity)
CV output voltage
UPPER VOICE
−3V–+10V, 1V/oct.
LOWER VOICE
−3V–+7V, 1V/oct.
LFO output voltage
TRIANGLE
±5 V, 10 Vp-p
SQUARE WAVE
+10 V, 10 Vp-p
DELAYED SINE WAVE
±3 V, 6 Vp-p
EXTERNAL VIBRATO input voltage
Max. ±10 V
VIBRATO DEPTH slider
Max. 1 octave
VIBRATO DELAY slider
0 – 2.5 sec
LFO SPEED slider
Approx. 0.25 – 25 Hz
PITCH BEND control
±1 octave
TRANSPOSE switch
±2 octave
PORTAMENTO SPEED slider
Maximum speed: about 0.25 msec/oct
Minimum speed: about 0.5 sec/oct
PORTAMENTO foot switch
KORG PS-1/PS-3 pedal switch
INTERVAL foot switch
KORG PS-1/PS-3 pedal switch
GATE output voltage (on ARP 2600 FS panel)
0 V at all keys up, +10 V at key on
TRIGGER output voltage (on ARP 2600 FS panel)
+10 V, 0.5 ms pulse wave at key on
Arpeggiator
OFF, AUTO, UP, DOWN, UP&DOWN, RANDOM, SEQ PLAY

General

Power supply
AC power supply terminal
Power consumption
30W
Dimensions (W × D × H), Weight
ARP 2600 FS
836 x 232 x 509 mm / 32.9 x 9.13 x 20.0 inches, 19.3 kg / 42.55 lbs.
ARP 3620
914 x 274 x 158 mm / 36.0 x 10.8 x 6.2 inches,11.3 kg / 24.91 lbs.
Included Items
Road case, Casters (x4), AC power cord, 8-pin DIN cable, 1,100 mm patch cables (x5), 600 mm patch cables (x5), Owner’s manual, Original English manual (replica)
Accessories (Sold separately)
KORG PS-1/PS-3 pedal switch
* All products names and specification names are trademarks or registered trademarks of their respective owners.
* Appearance and specifications of products are subject to change without notice.
We use cookies to give you the best experience on this website. Learn more Got it