Restoring the factory default settings
1Turn on the power while holding down the DELAY button.
The REVERB and ARP buttons blink.
2Press the ARP button to show the data onscreen that’s targeted for factory reset.
Turn the TYPE knob to select which parameters are to be reset.
ALL (): resets all of the following settings to their factory defaults.
GLOB (): resets the global parameters to their factory defaults.
PROG (): resets the programs (edits you’ve made to the sounds and effects) to their factory defaults.
OSC (): resets the user custom oscillator to its factory defaults.
Mod (): resets the user custom modulation to its factory defaults.
DEL (): resets the user custom delay to its factory defaults.
REV (): resets the user custom reverb to its factory defaults.
3Press the ARP button that’s blinking to execute the factory reset. The ARP button changes from blinking to continuously lit, and RESET () is shown in the display. The unit automatically restarts when the reset is finished.
Press the REVERB button to cancel. If you do this, the factory reset is not executed, and the unit automatically restarts.