Restoring the factory settings

This shows you how to restore the program and global data settings on the microKORG2 to their default values (factory reset).

 

Once you’ve performed a factory reset, any existing data on the microKORG2 is overwritten with the factory default settings. Check whether it’s all right to overwrite the data before you do this.

 

Don’t touch the knobs, the keyboard or any other controls on this instrument while the data is being reset. Never turn off the power while the factory reset is in progress.

 

 

1Press the power button while holding down the FUNCTION 2 button.

“FACTORY RESET” is shown.

2Press the buttons corresponding to the items you want to initialize, and perform the reset.

FUNCTION 1 (PROGs) button: resets all program settings

FUNCTION 2 (GLOBAL) button: resets the global settings

FUNCTION 3 (LOOP REC) button: resets the loop recorder settings

FUNCTION 4 button (ALL): resets all settings

FUNCTION 5 button (CANCEL): cancels the factory reset

The instrument starts up normally once the reset is completed.