INITIALIZE (INIT), COPY, MANUAL, TROPHY

Initializing the programs and timbres (INIT)

1Select a program to initialize.

2Press the INIT (FUNCTION 1) button while holding down the FUNC (FUNCTION 5) button.

3Turn the EDIT CONTROL knob 1 or press the INC, DEC buttons (FUNCTION 2, 1 button) to select what to initialize.

4Press the EXECUTE (FUNCTION 4) button to initialize. Press the CANCEL (FUNCTION 5) button to cancel.

Initialize Target   [PROGRAM, TIMBRE 1, TIMBRE 2]

Sets what part of the program to initialize.

Note: Initializing does not overwrite the data stored in the microKORG2's memory— you must write the program to memory if you want to save its initialized state.

Copying programs and timbres (COPY)

1Select the copy destination program.

2Press the COPY (FUNCTION 2) button while holding down the FUNC (FUNCTION 5) button.

3Use the EDIT CONTROL 1–4 knob or the INC, DEC buttons (FUNCTION 2, 1 buttons) to select the copy source program item or the copy destination timbre.

4Press the EXECUTE (FUNCTION 4) button to execute the copy operation. Press the CANCEL (FUNCTION 5) button to cancel.

Source Program   [CLASSIC A1...USER H8]

Select a program from which you want to copy the settings to the current program.

Module   [ALL, TIMBRE 1, TIMBRE 2, ASSIGN, ARP, PATCH, VOCAL PROCESSOR, EFFECT, EQ]

Select the program item to copy.

Timbre Parts   [ALL, VOICE, PITCH, ...PATCH ALL]

When Module is set to “TIMBRE 1” or “TIMBRE 2”: Select the items to copy from the specified tim­bre.

Target Timbre   [TIMBRE 1, 2]

When Module is set to “TIMBRE 1” or “TIMBRE 2”: Select the copy destination timbre.

Patch Parts   [TIMBRE 1 PATCH 1...TIMBRE 2 PATCH 6]

When Module is set to “PATCH”: Select the patch to copy.

Target Patch   [TIMBRE 1 PATCH 1...TIMBRE 2 PATCH 6]

When Module is set to “PATCH”: Select the copy destination patch.

Vocal Parts   [VOCAL ALL ...HARMONIZER]

When Module is set to “VOCAL PROCESSOR”: Select the items to copy.

Effect Parts   [EFFECT ALL ... REVERB]

When Module is set to “EFFECT”: Select the items to copy.

Note: Copying data does not overwrite the data stored in the microKORG2's memory— you must write the program to memory if you want to save its edited state resulting from the copy operation.

Manual / GUI Design

To view the system version, credits, and the QR code that lets you access the HTML version of the Owner's Manual, please do the following.

1Press the MANUAL (FUNCTION 3) button while holding down the FUNC (FUNCTION 5) button.

2Press the CUR <, CUR > button (FUNCTION 2 button) to switch between pages.

3Use your smartphone or other device to scan the 2D code that lets you view the HTML Owner’s Manual.

TROPHY

To celebrate you exploring the functionality of the microKORG2, the trophies on this page will turn colorful after being unlocked. To see a description of what you did to earn the trophy, select it with the INC and DEC buttons (FUNCTION 1, 2) and press the INFO button (FUNCTION 3). Try collecting all of the trophies!