You can adjust (calibrate) the damper and expression pedals so that they work more accurately.
1Turn off the power of the Keystage.
2While holding down the SETTING button and the SHIFT button at the same time, turn on the power.
3Turn the VALUE dial to select the pedal to calibrate, and press the WRITE button to confirm.
P1 Damper: Damper pedal connected to the DAMPER jack
P1 Expression: Expression pedal connected to the DAMPER jack
P2 Damper: Damper pedal connected to the EXPRESSION jack
P2 Expression: Expression pedal connected to the EXPRESSION jack
4Set the minimum value for the pedal.
Damper pedal: Press the WRITE button without pressing the pedal.
Expression pedal: With the pedal pushed all the way down with your heel (the minimum setting), press the WRITE button.
5Set the maximum value for the pedal.
Damper pedal: With the pedal pushed all the way down, press the WRITE button.
Expression pedal: With the pedal pushed all the way up with your toes (the maximum setting), press the WRITE button.
6Press the WRITE button to save the settings.
7Turn off this instrument and then turn it on again.
Note:Wait at least five seconds when switching the power on and off again.