Registering the chords you like (user chords)

You can register the chords you like as “user chords”. A chord of up to eight notes can be registered in each note slot.

 

1Press the CHORD button while holding down the SHIFT button to show the chord mode edit screen (page 1).

2Use the VALUE dial or VALUE buttons to select a chord set.

 

3Press a key from C to B to select the note slot where you want to register the chord.

4Turn knobs 1–8 to set the notes in the chord.

 

Tip:You can also specify the chord notes by playing the keys. When you play the chord notes while holding down the SHIFT button and then release the SHIFT button, the chord is set in the note slot that you selected in step 3.

5To register the chord, press the WRITE button.

The screen for selecting the save destination appears.

6Turn the VALUE dial to select the user chord (User 01–User 32) for the save destination.

 

7Press the WRITE button again.

The screen for inputting the name appears.

 

8Use the VALUE dial and the PAGE —/+ buttons to input the name for your user chord.

You can use the VALUE dial to edit the characters, and use the PAGE —/+ buttons to change the input posi­tion.

9To save, press the WRITE button.

Press the EXIT button to return to the main screen.