Using the Keystage with an iPad/iPhone

Here’s how to connect the Keystage to your iPad/iPhone, and control a DAW or software sound generator run­ning on that device from this instrument to output sound.

A USB-C to USB adapter or a Lightning to USB camera adapter is required to connect the Keystage to an iPad or iPhone.

 

Make sure to use the included USB cable.

 

When connecting to an iPad/iPhone equipped with a Lightning connector, you must connect an AC adapter (sold separately) to the DC 9V jack of the Keystage.

 

Turn the VOLUME knob of the Keystage all the way down before turning on the power.
Check whether your iPad/iPhone meets the operating requirements of the Keystage before use.

See the Korg website for the latest information on OS support.
https://www.korg.com/support/os/

 

1Connect the Keystage to an external device such as a powered monitor speaker or headphones.
→Connecting an external device

2Use a USB cable to connect the USB-B port on the Keystage to the USB adapter that’s connected to your iPad/iPhone.

iPads/iPhones with a USB-C port:

Use a USB-C to USB adapter. The Keystage automatically turns on when connected, as it is supplied by USB bus power.

iPads/iPhones with a Lightning connector:

Use a Lightning to USB camera adapter. Connect an AC adapter (sold separately) to the Keystage and press the power button on the Keystage to turn on the power.

3On your iPad/iPhone, launch an application such as a DAW or software sound generator.

4Use the VOLUME knob on the Keystage to adjust the volume.