Connecting a MIDI device to your iPhone/iPad

MIDI data can be transmitted and received between your iPhone/iPad and a MIDI device to which the BM-1 is connected.

 

For details on connecting to or disconnecting from an iPhone/iPad, refer to the Bluetooth MIDI Con­nection Guide.

Note: If the BM-1 does not enter connection standby mode (with the LED slowly blinking blue) right after the MIDI device is turned on, make sure that the BM-1 is not connected to any other devices (such as a computer, an iPhone/iPad or a Bluetooth MIDI device) in the vicinity, and disconnect from those devices if it is.

 

Check whether your iPhone/iPad meets the operating requirements of this device before use.

See the Korg website for the latest information on OS support.

 

Configuring your DAW or software sound generator application

To use the BM-1 with your iPhone/iPad, configure the settings in the application you’re using or in KORG Bluetooth MIDI Connect. See the Bluetooth MIDI Connection Guide.