1212 I/O Record Monitoring
1212 I/O Website
Contents
General information
The 1212 I/O's features direct input-to-output audio routing, for zero-latency record monitoring. Some applications support only the direct monitoring (such as Deck II); others offer a choice between direct hardware monitoring and software monitoring (such as Cubase VST and Digital Performer).
Software monitoring allows you to route record inputs through effects plug-ins in digital audio software - for applying reverb to a vocal input, for instance. In general, however, software monitoring also adds a relatively large delay, which some may find distracting during recording. The actual amount of delay will vary depending on the audio software being used.
Direct hardware monitoring uses the 1212 I/O's built-in mixer to route audio directly from input to output. This is extremely efficient, and adds no delay to the monitored output. However, since this bypasses the main CPU, no effects plug-ins can be applied to record inputs. Effects plug-ins can still be used on playback tracks, as usual.
With most software, any input can be routed to any output for monitoring. For instance, ADAT 1-4 could be routed to Analog L, and ADAT 5-8 to Analog R. Note also that the direct hardware monitoring uses hard-panning only; it is not possible to pan a signal between a stereo pair.
Program-specific information
For more program-specific information on record monitoring, click on the desired link below.
Record monitoring with Digital PerformerRecord monitoring with Logic Audio
Copyright 1998-2000 Korg Inc. FAQ Version: 11/29/00